R3303-HP HSR6800 Routers IP Multicast Command Reference

249
Multicast VPN configuration commands
display bgp mdt group
Use display bgp mdt group to display information about a BGP MDT peer group.
Syntax
display bgp mdt group [ group-name ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
group-name: Specifies a BGP MDT peer group by its group name. A group name is a case-sensitive
string of 1 to 47 characters and must not contain any space.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about the BGP MDT peer group test.
<Sysname> display bgp mdt group test
BGP peer-group is test
Remote AS 2004
Type : external
Maximum allowed prefix number: 4294967295
Threshold: 75%
Configured hold timer value: 180
Keepalive timer value: 60
Minimum time between advertisement runs is 30 seconds
Connect-interface has been configured
Multi-hop ebgp been enabled
Peer Preferred Value: 0
No routing policy is configured
Members:
Peer AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State
2.2.2.1 2004 0 0 0 0 00:01:21 Active