R3303-HP HSR6800 Routers IP Multicast Command Reference

251
Field Descri
p
tion
State
State of the peer:
• Active—Waiting for reestablishing a TCP connection
after a establishment failure.
• Connect—A TCP connection is required but not
established yet.
• Established—A TCP connection is established.
• Idle—No TCP connections are required after the peer
relationship is configured.
• Idle(Admin)—The peer is configured not to require any
TCP connection.
• Openconfirm—Waiting for the keepalive message after
receiving an open message.
• Opensent—An open message is successfully sent to the
peer.
display bgp mdt peer
Use display bgp mdt peer to display BGP MDT peer information.
Syntax
display bgp mdt peer [ [ ip-address ] verbose ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
ip-address: Specifies a BGP MDT peer by its IP address.
verbose: Displays detailed information.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the detailed information of the BGP MDT peer 2.2.2.1.
<Sysname> display bgp mdt peer 2.2.2.1 verbose
Peer: 2.2.2.1 Local: 2.2.2.2
Type: IBGP link
BGP version 4, remote router ID 1.1.1.1
BGP current state: Established, Up for 00h01m51s