R3303-HP HSR6800 Routers IP Multicast Command Reference

253
Field Descri
p
tion
BGP current state
Current state of the BGP peer:
• Active—Waiting for reestablishing a TCP connection after a establishment
failure.
• Connect—A TCP connection is required but not established yet.
• Established—A TCP connection is established between peers.
• Idle—No TCP connections are required after the peer relationship is
configured.
• Idle(Admin)—The peer is configured not to require any TCP connection.
• Openconfirm—Waiting for the keepalive message after receiving an open
message.
• Opensent—An open message is successfully sent to the peer.
BGP current event
Current event of the peer:
• AdvTimerExpired—The route advertisement timer expires.
• ConnCloesed—The TCP connection is closed.
• ConnOpen—A TCP connection is required.
• ConnOpenFailed—Fail to establish a TCP connection.
• CRTTimerExpired—The connect timer expires.
• HOLDTimerExpired—The holdtime timer expires.
• KATTimerExpired—The keepalive timer expires.
• RecvKeepalive—A keepalive message is received from the peer.
• RecvNotification—A notification message is received from the peer.
• RecvOpen—An open message is received from the peer.
• RecvRouteRefresh—A route-refresh message is received from the peer.
• RecvUpdate—An update message is received from the peer.
• Start—No TCP connections are required after the peer relationship is
configured.
• Stop—The peer is configured not to require any TCP connection at the CLI.
• TransFatalError—A fatal mistake occurs during the establishment of the TCP
connection.
BGP last state
Previous state of the peer:
• Active—Waiting for reestablishing a TCP connection after an establishment
failure.
• Connect—A TCP connection is required but not established yet.
• Established—A TCP connection is established between peers.
• Idle—No TCP connections are required after the peer relationship is
configured.
• Idle(Admin)—The peer is configured at the CLI not to require any TCP
connection.
• Openconfirm—Waiting for the keepalive message after receiving an open
message.
• Opensent—An open message is successfully sent to the peer.
Port Local and remote TCP port numbers for establishing a TCP connection.
Configured
Locally configured timer value:
• Active Hold Time—Holdtime interval for the connection to the peer.
• Keepalive Time—Keepalive interval for the connection to the peer.