R3303-HP HSR6800 Routers IP Multicast Command Reference

254
Field Descri
p
tion
Received
Received timer settings on the peer:
Active Hold Time—Holdtime interval for the connection to the peer.
Negotiated
Negotiated timer settings:
• Active Hold Time—Holdtime interval for the connection to the peer.
• Keepalive Time—Keepalive interval for the connection to the peer.
Peer optional capabilities Optional capabilities supported by the peer.
Peer support bgp
multi-protocol extended
The peer supports multiprotocol BGP extensions.
Peer support bgp route
refresh capability
The peer supports the BGP route refresh function.
Address family IPv4
Unicast: advertised and
received
Routes are advertised and received in IPv4 unicasts.
Address family IPv4 MDT:
advertised and received
Routes are advertised and received in IPv4 multicasts.
Received Total numbers of received packets and updates.
Sent Total numbers of sent packets and updates.
Maximum allowed prefix
number
Maximum number of allowed prefixes.
Threshold
Percentage of received prefixes from the peer group to maximum prefixes
allowed to receive from the peer group.
Minimum time between
advertisement runs
Minimum route advertisement interval.
Optional capabilities Optional capabilities enabled by the peer.
Connect-interface has been
configured
The source interface for TCP connection is configured.
Multi-hop ebgp been
enabled
The hop count of the peer's TCP connection can exceed 1 but cannot exceed the
configured limit.
Peer Preferred Value Preferred value specified for the routes from the peer.
Routing policy configured Local routing policy.
display bgp mdt routing-table
Use display bgp mdt all routing-table to display BGP MDT routing information.
Syntax
display bgp mdt { all | route-distinguisher route-distinguisher } routing-table [ ip-address [ mask |
mask-length ] ] [ | { begin | exclude | include } regular-expression ]
Views
Any view