R3303-HP HSR6800 Routers IP Multicast Command Reference

264
Enable IP multicast routing for the VPN instance before you configure this command.
Related commands
• multicast routing-enable
• multicast-domain log switch-group-reuse
• multicast-domain switch-delay
• multicast-domain switch-group-pool
Examples
# Specify 224.1.1.1 as the share-group address in VPN instance mvpn and associate MTI 0 with the VPN
instance.
<Sysname> system-view
[Sysname] ip vpn-instance mvpn
[Sysname-vpn-instance-mvpn] multicast-domain share-group 224.1.1.1 binding mtunnel 0
multicast-domain switch-delay
Use multicast-domain switch-delay to configure the switch-delay period.
Use undo multicast-domain switch-delay to restore the default.
Syntax
multicast-domain switch-delay switch-delay
undo multicast-domain switch-delay
Views
VPN instance view
Default command level
2: System level
Parameters
switch-delay: Specifies a switch-delay period (delay time for multicast traffic to be switched from the
share-MDT to the switch-MDT) in seconds, in the range of 3 to 60.
Default
The switch-delay period is 5 seconds.
Examples
# Set the switch-delay period to 20 seconds in VPN instance mvpn.
<Sysname> system-view
[Sysname] ip vpn-instance mvpn
[Sysname-vpn-instance-mvpn] multicast-domain switch-delay 20
multicast-domain switch-group-pool
Use multicast-domain switch-group-pool to configure the address range of the switch-group-pool and the
switching condition.
Use undo multicast-domain switch-group-pool to restore the default.