R3303-HP HSR6800 Routers IP Multicast Command Reference

266
Syntax
peer { group-name | ip-address } enable
undo peer { group-name | ip-address } enable
Default
No BGP MDT peer or peer group is enabled.
Views
BGP-MDT sub-address family view
Default command level
2: System level
Parameters
group-name: Name of a BGP MDT peer group, a case-sensitive string of 1 to 47 characters. A peer
group name must not contain any space.
ip-address: IP address of a BGP MDT peer.
Usage guidelines
The BGP peer or peer group must be configured before this command can take effect.
Examples
# Configure and enable the BGP MDT peer 18.10.0.9.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer 18.10.0.9 as-number 100
[Sysname-bgp] ipv4-family mdt
[Sysname-bgp-af-mdt] peer 18.10.0.9 enable
Related commands
• group
• peer as-number
• peer group (Layer 3—IP Routing Command Reference)
peer group (BGP-MDT sub-address family view)
Use peer group to add a peer to the BGP MDT peer group.
Use undo peer group to delete a specified peer from the peer group.
Syntax
peer ip-address group group-name
undo peer ip-address group group-name
Default
A peer belongs to no peer groups.
Views
BGP-MDT sub-address family view