R3303-HP HSR6800 Routers IP Multicast Command Reference

271
IPv6 multicast routing and forwarding
configuration commands
display multicast ipv6 boundary
Use display multicast ipv6 boundary to display IPv6 multicast boundary information on the specified
interfaces.
Syntax
display multicast ipv6 boundary { group [ ipv6-group-address [ prefix-length ] ] | scope [ scope-id ] }
[ interface interface-type interface-number ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
group: Displays the IPv6 multicast boundary information for the specified group.
ipv6-group-address: Specifies an IPv6 multicast group address in the range of FFxy::/16, where x and y
represent any hexadecimal numbers from 0 to F.
prefix-length: Specifies the address prefix length in the range of 8 to 128. The default is 128.
scope: Displays the IPv6 multicast group boundary information in the admin-scope zone.
scope-id: Specifies the ID of an admin-scope zone in the range of 3 to 15, which is identified by the
scope field in the IPv6 multicast group address.
interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display IPv6 multicast boundary information on all interfaces.
<Sysname> display multicast ipv6 boundary group
IPv6 multicast boundary information
Boundary Interface
FF03::/16 GE2/1/1
FF09::/16 Pos5/0/0