R3303-HP HSR6800 Routers IP Multicast Command Reference

274
Field Descri
p
tion
00001 Sequence number of the (S, G) entry.
(2000:5::1:1000, FF1E::1234) (S, G) entry in the IPv6 multicast forwarding table.
MID MID of the (S, G). Each (S, G) entry has a unique MID.
Flags
Current state of the (S, G) entry. Different bits indicate different
states of the (S, G) entry. For major values of this field, see Table 60
and Table 61.
Uptime Length of time for which the (S, G) entry has been up.
Timeout in Length of time in which the (S, G) entry will time out.
Incoming interface Incoming interface of the (S, G) entry.
List of 1 outgoing interfaces:
1: GigabitEthernet2/1/2
Outgoing interface list.
Interface type and number.
Matched 146754 packets(10272780
bytes), Wrong If 0 packets
(S, G)-matched packets (bytes), packets with incoming interface
errors.
Forwarded 139571 packets(9769970
bytes)
(S, G) forwarded IPv6 multicast packets (bytes).
Table 60 Major values of the Flags field (before the colon)
Value Meanin
g
0x1 A register-stop message must be sent.
0x2
Whether the IPv6 multicast source that corresponds to the (S, G)
entry is active.
0x4 Null forwarding entry.
0x8 Whether the RP is a border router in an IPv6 PIM domain.
0x10 A register outgoing interface is available.
0x400 (S, G) entry to be deleted.
0x8000
The (S, G) entry is in smoothing process after active/standby
switchover.
0x10000 The (S, G) entry has been updated during the smoothening process.
0x80000
The (S, G) entry has been updated and need to be deleted before a
new entry is added.
0x100000 The (S, G) entry was added successfully.
0x1000000 Multicast forwarding entry for IPv6 BIDIR-PIM.
0x2000000 RP for IPv6 BIDIR-PIM.
Table 61 Major values of the flags field (after the colon)
Value Meanin
g
0
The entry does not belong to the MPU, or the MPU has synchronized the entry
to other cards.