R3303-HP HSR6800 Routers IP Multicast Command Reference

275
Value Meanin
g
1
The MPU will synchronize the incoming interface information of the entry to
other cards.
2
The MPU will synchronize the outgoing interface information of the entry to
other cards.
4 The MPU will synchronize the RP information of the entry to other cards.
80
The MPU will synchronize the encapsulation group information of the entry to
other cards.
80000000 The MPU will notify other cards to add the entry.
40000000 The MPU will notify other cards to remove the entry.
Related commands
• display multicast ipv6 routing-table
• multicast ipv6 forwarding-table downstream-limit
• multicast ipv6 forwarding-table route-limit
display multicast ipv6 forwarding-table df-info
Use display multicast ipv6 forwarding-table df-info to display the DF information of the IPv6 multicast
forwarding table.
Syntax
In standalone mode:
display multicast ipv6 forwarding-table df-info [ rp-address ] [ slot slot-number ] [ | { begin | exclude |
include } regular-expression ]
In IRF mode:
display multicast ipv6 forwarding-table df-info [ rp-address ] [ chassis chassis-number slot slot-number ]
[ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
rp-address: Specifies the RP address of IPv6 BIDIR-PIM.
slot slot-number: Specifies a card by its slot number. If no slot is specified, the command displays the DF
information of the IPv6 multicast forwarding table for the MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on a member device. The chassis-number
argument specifies an IRF member device ID, and the slot-number argument specifies a card by its slot
number. If this option is not specified, this command displays the DF information of the IPv6 multicast
forwarding table for all MPUs in the IRF fabric. (In IRF mode.)
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.