R3303-HP HSR6800 Routers IP Multicast Command Reference

278
Table 63 Command output
Field Descri
p
tion
IPv6 multicast routing table IPv6 multicast routing table.
Total 1 entry Total number of (S, G) entries in the IPv6 multicast routing table.
00001 Sequence number of the (S, G) entry.
(2001::2, FFE3::101) (S, G) entry in the IPv6 multicast forwarding table.
Uptime Length of time for which the (S, G) entry has been up.
Upstream interface
Upstream interface of the (S, G) entry. Multicast packets should arrive
through this interface.
List of 2 downstream interfaces
Downstream interface list. These interfaces must forward multicast
packets.
Related commands
display multicast ipv6 forwarding-table
display multicast ipv6 rpf-info
Use display multicast ipv6 rpf-info to display RPF information of an IPv6 multicast source.
Syntax
display multicast ipv6 rpf-info ipv6-source-address [ ipv6-group-address ] [ | { begin | exclude |
include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
ipv6-source-address: Specifies an IPv6 multicast source address.
ipv6-group-address: Specifies an IPv6 multicast group address in the range of FFxy::/16 (excluding
FFx0::/16, FFx1::/16, FFx2::/16, and FF0y::), where x and y represent any hexadecimal numbers from
0 to F.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display all RPF information of the multicast source with an IPv6 address 2001::101.
<Sysname> display multicast ipv6 rpf-info 2001::101
RPF information about source 2001::101: