R3303-HP HSR6800 Routers IP Multicast Command Reference

281
multicast ipv6 forwarding-table downstream-limit
Use multicast ipv6 forwarding-table downstream-limit to configure the maximum number of downstream
nodes for a single entry in the IPv6 multicast forwarding table.
Use undo multicast ipv6 forwarding-table downstream-limit to restore the default.
Syntax
multicast ipv6 forwarding-table downstream-limit limit
undo multicast ipv6 forwarding-table downstream-limit
Default
The maximum number is 128.
Views
System view
Default command level
2: System level
Parameters
limit: Specifies the maximum number of downstream nodes (the maximum number of outgoing interfaces)
for a single entry in the IPv6 multicast forwarding table. The value range for this argument is 0 to 128.
Examples
# Set the maximum number of downstream nodes for a single entry in the IPv6 multicast forwarding table
to 120.
<Sysname> system-view
[Sysname] multicast ipv6 forwarding-table downstream-limit 120
Related commands
display multicast ipv6 forwarding-table
multicast ipv6 forwarding-table route-limit
Use multicast ipv6 forwarding-table route-limit to configure the maximum number of entries in the IPv6
multicast forwarding table.
Use undo multicast ipv6 forwarding-table route-limit to restore the default.
Syntax
multicast ipv6 forwarding-table route-limit limit
undo multicast ipv6 forwarding-table route-limit
Default
The maximum number is 1024.
Views
System view
Default command level
2: System level