R3303-HP HSR6800 Routers IP Multicast Command Reference

284
Views
User view
Default command level
2: System level
Parameters
ipv6-source-address: Specifies an IPv6 multicast source address.
ipv6-group-address: Specifies an IPv6 multicast group address in the range of FFxy::/16, where x and y
represent any hexadecimal numbers from 0 to F.
prefix-length: Specifies the address prefix length. The default value is 128. For an IPv6 multicast group
address, the value range for this argument is 8 to 128. For an IPv6 multicast source address, the value
range for this argument is 0 to 128.
incoming-interface: Specifies the IPv6 multicast forwarding entries, where the incoming interface is the
specified one.
interface-type interface-number: Specifies an interface by its name and number.
register: Specifies the register interface.
all: Specifies all forwarding entries in the IPv6 multicast forwarding table.
Usage guidelines
When a forwarding entry is deleted from the IPv6 multicast forwarding table, the corresponding routing
entry is also deleted from the IPv6 multicast routing table.
Examples
# Clear the IPv6 multicast forwarding entries related to the IPv6 multicast group FF03::101 from the IPv6
multicast forwarding table.
<Sysname> reset multicast ipv6 forwarding-table ff03::101
Related commands
• display multicast ipv6 forwarding-table
• display multicast ipv6 routing-table
• reset multicast IPv6 routing-table
reset multicast ipv6 routing-table
Use reset multicast ipv6 routing-table to clear IPv6 routing entries from the IPv6 multicast routing table.
Syntax
reset multicast ipv6 routing-table { { ipv6-source-address [ prefix-length ] | ipv6-group-address
[ prefix-length ] | incoming-interface { interface-type interface-number | register } } * | all }
Views
User view
Default command level
2: System level
Parameters
ipv6-source-address: Specifies an IPv6 multicast source address.