R3303-HP HSR6800 Routers IP Multicast Command Reference

289
Table 66 Command output
Field Description
Total 1 IP Group(s). Total number of IPv6 multicast groups.
Total 1 IP Source(s). Total number of IPv6 multicast sources.
Total 1 MAC Group(s). Total number of MAC multicast groups.
Port flags: D-Dynamic port,
S-Static port, C-Copy port
Port flag: D stands for dynamic port, S for static port, and C for port copied
from a (*, G) entry to an (S, G) entry.
Subvlan flags: R-Real VLAN,
C-Copy VLAN
Sub-VLAN flag: R stands for real egress sub-VLAN under the current entry,
and C for sub-VLAN copied from a (*, G) entry to an (S, G) entry.
Router port unit board Mask indicating a board with a router port residing on it.
Router port(s) Number of router ports.
( 00:01:30 )
Remaining time of the aging timer for the dynamic member port or router
port:
• In standalone mode, to display the remaining time of a non-aggregation
port that does not belong to the MPU, you must specify the number of the
slot where the corresponding card resides by using slot slot-number. For
an aggregation port, you do not need to do this.
• In IRF mode, to display the remaining time of a non-aggregate port that
does not belong to the MPU, you must specify the IRF member device ID
and the slot number of the card by using the chassis chassis-number slot
slot-number option. For an aggregate port, you do not need to do this.
IP group address Address of an IPv6 multicast group.
MAC group address Address of a MAC multicast group.
Attribute Attribute of an IPv6 multicast group.
Host port unit board Mask indicating a board with a member port residing on it.
Host port(s) Number of member ports.
display mld host interface
Use display mld host interface to display information about the hosts tracked by MLD on the specified
interface.
Syntax
display mld host interface interface-type interface-number group ipv6-group-address [ source
ipv6-source-address ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.