R3303-HP HSR6800 Routers IP Multicast Command Reference

294
Field Description
Group mode
IPv6 multicast source filtering modes:
• Include.
• Exclude.
Source list
A list of IPv6 multicast sources that the hosts want to
receive information from.
display mld routing-table
Use display mld routing-table to display information about the MLD routing table.
Syntax
display mld routing-table [ ipv6-source-address [ prefix-length ] | ipv6-group-address [ prefix-length ] |
flags { act | suc } ] * [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
ipv6-source-address: Specifies a multicast source by its IPv6 address.
ipv6-group-address: Specifies an IPv6 multicast group address in the range of FFxy::/16, where x and y
represent any hexadecimal numbers from 0 to F.
prefix-length: Specifies the address prefix length. The default value is 128. For a multicast source address,
the value range for this argument is 0 to 128. For a multicast group address, the value range for this
argument is 8 to 128.
flags: Specifies the route flag.
act: Displays the MLD routes with the ACT flag
suc: Displays the MLD routes with the SUC flag.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about the MLD routing table.
<Sysname> display mld routing-table
Routing table
Total 2 entries
00001. (*, FF1E::101)