R3303-HP HSR6800 Routers IP Multicast Command Reference

300
host-tracking (MLD view)
Use host-tracking to enable the MLD host tracking function globally.
Use undo host-tracking to disable the MLD host tracking function globally.
Syntax
host-tracking
undo host-tracking
Default
This function is disabled.
Views
MLD view
Default command level
2: System level
Examples
# Enable the MLD host tracking function globally.
<Sysname> system-view
[Sysname] mld
[Sysname-mld] host-tracking
Related commands
mld host-tracking.
last-listener-query-interval (MLD view)
Use last-listener-query-interval to configure the MLD last listener query interval globally.
Use undo last-listener-query-interval to restore the default.
Syntax
last-listener-query-interval interval
undo last-listener-query-interval
Default
The MLD last listener query interval is 1 second.
Views
MLD view
Default command level
2: System level
Parameters
interval: Specifies an MLD last listener query interval (time that the device waits between sending MLD
multicast-address-specific queries) in seconds, in the range of 1 to 5.