R3303-HP HSR6800 Routers IP Multicast Command Reference

321
undo startup-query-count
Default
The startup query count is set to the MLD querier's robustness variable.
Views
MLD view
Default command level
2: System level
Parameters
value: Specifies a startup query count (the number of queries that the MLD querier sends on startup) in the
range of 2 to 5.
Examples
# Set the startup query count to 3 globally.
<Sysname> system-view
[Sysname] mld
[Sysname-mld] startup-query-count 3
Related commands
• mld startup-query-count
• robust-count
startup-query-interval (MLD view)
Use startup-query-interval to configure the startup query interval globally.
Use undo startup-query-interval to restore the default.
Syntax
startup-query-interval interval
undo startup-query-interval
Default
The startup query interval is 1/4 of the "MLD query interval".
Views
MLD view
Default command level
2: System level
Parameters
interval: Specifies a startup query interval (interval between general queries that the MLD querier sends
on startup) in seconds, in the range of 1 to 18000.
Examples
# Set the startup query interval to 5 seconds globally.
<Sysname> system-view
[Sysname] mld