R3303-HP HSR6800 Routers IP Multicast Command Reference

325
IPv6 PIM configuration commands
bidir-pim enable (IPv6 PIM view)
Use bidir-pim enable to enable IPv6 BIDIR-PIM.
Use undo bidir-pim enable to disable IPv6 BIDIR-PIM.
Syntax
bidir-pim enable
undo bidir-pim enable
Default
IPv6 BIDIR-PIM is disabled.
Views
IPv6 PIM view
Default command level
2: System level
Usage guidelines
This command takes effect only after IPv6 multicast routing is enabled.
Examples
# Enable IPv6 multicast routing, enter IPv6 PIM view, and enable IPv6 BIDIR-PIM.
<Sysname> system-view
[Sysname] multicast ipv6 routing-enable
[Sysname] pim ipv6
[Sysname-pim6] bidir-pim enable
Related commands
• multicast ipv6 routing-enable
• pim ipv6
bsm-fragment enable (IPv6 PIM view)
Use bsm-fragment enable to enable bootstrap message (BSM) semantic fragmentation.
Use undo bsm-fragment enable to disable BSM semantic fragmentation.
Syntax
bsm-fragment enable
undo bsm-fragment enable
Default
BSM semantic fragmentation is enabled.