R3303-HP HSR6800 Routers IP Multicast Command Reference

330
Default command level
2: System level
Parameters
interval: Specifies a BS period in seconds. The value ranges from 10 to 2147483647.
Examples
# Set the BS period to 30 seconds.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] c-bsr interval 30
Related commands
• c-bsr
• c-bsr holdtime
c-bsr priority (IPv6 PIM view)
Use c-bsr priority to configure the global C-BSR priority.
Use undo c-bsr priority to restore the default.
Syntax
c-bsr priority priority
undo c-bsr priority
Default
The C-BSR priority is 64.
Views
IPv6 PIM view
Default command level
2: System level
Parameters
priority: Specifies the priority of the C-BSR, in the range of 0 to 255. A larger value means a higher
priority.
Examples
# Set the global C-BSR priority to 5.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] c-bsr priority 5
Related commands
c-bsr
c-bsr scope
Use c-bsr scope to configure the C-BSR in the IPv6 admin-scope zone.