R3303-HP HSR6800 Routers IP Multicast Command Reference

333
c-rp advertisement-interval (IPv6 PIM view)
Use c-rp advertisement-interval to configure the interval at which C-RP-Adv messages are sent.
Use undo c-rp advertisement-interval to restore the default.
Syntax
c-rp advertisement-interval interval
undo c-rp advertisement-interval
Default
The C-RP-Adv interval is 60 seconds.
Views
IPv6 PIM view
Default command level
2: System level
Parameters
interval: Specifies a C-RP-Adv interval in seconds. The value ranges from 1 to 65535.
Examples
# Set the global C-RP-Adv interval to 30 seconds.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] c-rp advertisement-interval 30
Related commands
c-rp
c-rp holdtime (IPv6 PIM view)
Use c-rp holdtime to configure the global C-RP timeout timer, namely, the time that the BSR waits for a
C-RP-Adv message from C-RPs.
Use undo c-rp holdtime to restore the default.
Syntax
c-rp holdtime interval
undo c-rp holdtime
Default
The C-RP timeout timer is 150 seconds.
Views
IPv6 PIM view
Default command level
2: System level