R3303-HP HSR6800 Routers IP Multicast Command Reference

337
display pim ipv6 claimed-route
Use display pim ipv6 claimed-route to display information about IPv6 unicast routes that IPv6 PIM uses.
Syntax
display pim ipv6 claimed-route [ ipv6-source-address ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
ipv6-source-address: Specifies an IPv6 multicast source. If you do not provide this argument, this
command displays information about all IPv6 unicast routes that IPv6 PIM uses.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If an (S, G) is marked SPT, this (S, G) entry uses an IPv6 unicast route.
Examples
# Display information about all IPv6 unicast routes that IPv6 PIM uses.
<Sysname> display pim ipv6 claimed-route
RPF information about: 2001::2
RPF interface: GigabitEthernet2/1/1, RPF neighbor: FE80::A01:100:1
Referenced prefix/prefix length: 2001::/64
Referenced route type: igp
RPF-route selecting rule: preference-preferred
The (S, G) or (*, G) list dependent on this route entry
(2001::2, FF03::101)
Table 75 Command output
Field Descri
p
tion
RPF information about: 2001::2
Information of the RPF route to IPv6 multicast source
2001::2.
RPF interface RPF interface type and number.
RPF neighbor IPv6 address of the RPF neighbor.
Referenced prefix/prefix length Address/mask of the reference route.