R3303-HP HSR6800 Routers IP Multicast Command Reference

338
Field Descri
p
tion
Referenced route type
Type of the referenced route:
• IGP—IGP IPv6 unicast route.
• EGP—EGP IPv6 unicast route.
• Unicast (direct)—Direct IPv6 unicast route.
• Unicast—Other IPv6 unicast route (such as IPv6
static unicast route).
• MBGP—IPv6 MBGP route.
RPF-route selecting rule Rule of RPF route selection.
The (S,G) or (*,G) list dependent on this route entry (S, G) or (*, G) entry list dependent on this RPF route.
display pim ipv6 control-message counters
Use display pim ipv6 control-message counters to display the statistics for IPv6 PIM control messages.
Syntax
display pim ipv6 control-message counters [ message-type { probe | register | register-stop } |
[ interface interface-type interface-number | message-type { assert | bsr | crp | graft | graft-ack | hello
| join-prune | state-refresh } ] * ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
probe: Displays the number of null register messages.
register: Specifies register messages.
register-stop: Specifies register-stop messages.
interface-type interface-number: Specifies an interface by its type and number.
assert: Specifies assert messages.
bsr: Specifies bootstrap messages.
crp: Specifies C-RP-Adv messages.
graft: Specifies graft messages.
graft-ack: Specifies graft-ack messages.
hello: Specifies hello messages.
join-prune: Specifies join/prune messages.
state-refresh: Specifies state refresh messages.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.