R3303-HP HSR6800 Routers IP Multicast Command Reference

343
Table 79 Command output
Field Descri
p
tion
Interface Interface name and its IPv6 address.
PIM version IPv6 PIM version.
PIM mode IPv6 PIM mode, dense or sparse.
PIM DR IPv6 address of the DR.
PIM DR Priority (configured) Priority for DR election.
PIM neighbor count Total number of IPv6 PIM neighbors.
PIM hello interval Interval between IPv6 PIM hello messages.
PIM LAN delay (negotiated) Negotiated prune message delay.
PIM LAN delay (configured) Configured prune message delay.
PIM override interval (negotiated) Negotiated prune override interval.
PIM override interval (configured) Configured prune override interval.
PIM neighbor tracking (negotiated) Whether neighbor tracking is enabled by negotiation.
PIM neighbor tracking (configured)
Whether neighbor tracking is enabled by
configuration.
PIM generation ID Generation_ID value.
PIM require generation ID
Whether rejection of Hello messages without
Generation_ID is enabled.
PIM hello hold interval IPv6 PIM neighbor timeout timer.
PIM assert hold interval Assert timeout timer.
PIM triggered hello delay Maximum delay of sending hello messages.
PIM J/P interval Join/prune interval.
PIM J/P hold interval Join/prune timeout timer.
PIM BSR domain border Whether PIM domain border is enabled.
Number of routers on network not using DR priority
Number of routers not using the DR priority field on the
subnet where the interface resides.
Number of routers on network not using LAN delay
Number of routers not using the LAN delay field on the
subnet where the interface resides.
Number of routers on network not using neighbor
tracking
Number of routers not using neighbor tracking on the
subnet where the interface resides.
display pim ipv6 join-prune
Use the display ipv6 pim join-prune command to display information about the join/prune messages to
send.