R3303-HP HSR6800 Routers IP Multicast Command Reference

24
Views
VLAN view
Default command level
2: System level
Usage guidelines
This command takes effect only if IGMP snooping is enabled in the VLAN.
Examples
# Enable IGMP snooping and the IGMP snooping querier function for VLAN 2.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
[Sysname-vlan2] igmp-snooping querier
Related commands
igmp-snooping enable
igmp-snooping query-interval
Use igmp-snooping query-interval to configure the interval for sending IGMP general queries.
Use undo igmp-snooping query-interval to restore the default.
Syntax
igmp-snooping query-interval interval
undo igmp-snooping query-interval
Default
The IGMP general query interval is 60 seconds.
Views
VLAN view
Default command level
2: System level
Parameters
interval: Specifies an interval in seconds for sending IGMP general queries, in the range of 2 to 300.
Usage guidelines
This command takes effect only if IGMP snooping is enabled in the VLAN.
Examples
# Enable IGMP snooping and set the interval for sending IGMP general queries to 20 seconds in VLAN
2.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] quit