R3303-HP HSR6800 Routers IP Multicast Command Reference

349
Assert FSM: [NI]
FSM information for non-downstream interfaces: None
Table 82 Command output
Field Descri
p
tion
Total 0 (*, G) entry; 1 (S, G) entry
Number of (S, G) and (*, G) entries in the IPv6 PIM routing table.
(2001::2, FFE3::101)
An (S, G) entry in the IPv6 PIM routing table.
RP IP address of the RP.
Protocol
IPv6 PIM mode: IPv6 PIM-SM or IPv6 PIM-DM.
Flag
Flag of the (S, G) or (*, G) entry in the IPv6 PIM routing table:
ACT—The entry has been used for routing data.
BIDIR—The entry was created by IPv6 BIDIR-PIM.
DEL—The entry will be removed.
EXPRUNE—Some outgoing interfaces are pruned by other IPv6
multicast routing protocols.
EXT—The entry contains outgoing interfaces provided by other IPv6
multicast routing protocols.
LOCThe entry is on a router directly connected to the same subnet
with the IPv6 multicast source.
NIIF—The entry contains unknown incoming interfaces.
NONBR—The entry has an IPv6 PIM neighbor searching failure.
RPT—The entry is on a RPT branch where (S, G) prunes have been
sent to the RP.
SPT—The entry is on the SPT.
SWT—The entry is in the process of RPT-to-SPT switchover.
WC—wildcard routing entry.
Uptime Length of time since the (S, G) or (*, G) entry was installed.
Upstream interface Upstream (incoming) interface of the (S, G) or (*, G) entry.
Upstream neighbor Upstream neighbor of the (S, G) or (*, G) entry.
RPF prime neighbor
RPF neighbor of the (S, G) or (*, G) entry:
For a (*, G) entry, if this router is the RP, the RPF neighbor of this (*,
G) entry is NULL.
For a (S, G) entry, if this router directly connects to the IPv6 multicast
source, the RPF neighbor of this (S, G) entry is NULL.
Downstream interface(s) information
Information of the downstream interfaces:
Number of downstream interfaces.
Downstream interface name.
Protocol type configured on the downstream interface.
Uptime of the downstream interfaces.
Expiration time of the downstream interfaces.
Related commands
display ipv6 multicast routing-table