R3303-HP HSR6800 Routers IP Multicast Command Reference

25
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
[Sysname-vlan2] igmp-snooping query-interval 20
Related commands
• igmp-snooping enable
• igmp-snooping max-response-time
• igmp-snooping querier
• max-response-time
igmp-snooping report source-ip
Use igmp-snooping report source-ip to configure the source IP address for the IGMP reports that the
IGMP snooping proxy sends.
Use undo igmp-snooping report source-ip to restore the default.
Syntax
igmp-snooping report source-ip { ip-address | current-interface }
undo igmp-snooping report source-ip
Default
The source IP address of the IGMP reports that the IGMP snooping proxy sends is 0.0.0.0.
Views
VLAN view
Default command level
2: System level
Parameters
ip-address: Specifies a source address for the IGMP reports that the IGMP snooping proxy sends, which
can be any legal IP address.
current-interface: Specifies the IP address of the current VLAN interface as the source address of IGMP
reports that the IGMP snooping proxy sends. If no IP address has been assigned to the current VLAN
interface, the default IP address 0.0.0.0 is used.
Usage guidelines
Before you configure this command in a VLAN, enable IGMP snooping in the VLAN.
The source IP address configured in the igmp-snooping report source-ip command also applies when the
simulated host sends IGMP reports.
Examples
# On VLAN 2, enable IGMP snooping and configure the source IP address for IGMP reports that the
I G M P s n o o p i n g p ro x y s e n d s t o 10 .1.1.1.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable