R3303-HP HSR6800 Routers IP Multicast Command Reference

360
Views
Interface view
Default command level
2: System level
Parameters
priority: Specifies a router priority for DR election, in the range of 0 to 4294967295. A larger value
means a higher priority.
Examples
# Set the router priority for DR election to 3 on GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] pim ipv6 hello-option dr-priority 3
Related commands
hello-option dr-priority
pim ipv6 hello-option holdtime
Use pim ipv6 hello-option holdtime to configure the PIM neighbor timeout timer on the current interface.
Use undo pim ipv6 hello-option holdtime to restore the default.
Syntax
pim ipv6 hello-option holdtime interval
undo pim ipv6 hello-option holdtime
Default
The IPv6 PIM neighbor timeout timer is 105 seconds.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies an IPv6 PIM neighbor timeout timer in seconds. The value ranges from 1 to 65535. A
value of 65535 makes the PIM neighbor always reachable.
Examples
# Set the IPv6 PIM neighbor timeout timer to 120 seconds on GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] pim ipv6 hello-option holdtime 120
Related commands
hello-option holdtime