R3303-HP HSR6800 Routers IP Multicast Command Reference

361
pim ipv6 hello-option lan-delay
Use pim ipv6 hello-option lan-delay to configure the LAN-delay time( namely, the time that the device
waits before forwarding a received prune message, on the current interface).
Use undo pim ipv6 hello-option lan-delay to restore the default.
Syntax
pim ipv6 hello-option lan-delay interval
undo pim ipv6 hello-option lan-delay
Default
The LAN-delay time is 500 milliseconds.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies a LAN-delay time in milliseconds. The value ranges from 1 to 32,767.
Examples
# Set the LAN-delay time to 200 milliseconds on GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] pim ipv6 hello-option lan-delay 200
Related commands
• hello-option lan-delay
• hello-option override-interval
• pim ipv6 hello-option override-interval
pim ipv6 hello-option neighbor-tracking
Use pim ipv6 hello-option neighbor-tracking to disable join suppression (namely, enable neighbor
tracking) on the current interface.
Use undo pim ipv6 hello-option neighbor-tracking to enable join suppression.
Syntax
pim ipv6 hello-option neighbor-tracking
undo pim ipv6 hello-option neighbor-tracking
Default
Join suppression is enabled. Namely, neighbor tracking is disabled.
Views
Interface view