R3303-HP HSR6800 Routers IP Multicast Command Reference

365
Syntax
pim ipv6 require-genid
undo pim ipv6 require-genid
Default
Hello messages without Generation_ID are accepted.
Views
Interface view
Default command level
2: System level
Examples
# Configure GigabitEthernet 2/1/1 to reject hello messages without Generation_ID.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] pim ipv6 require-genid
pim ipv6 sm
Use pim ipv6 sm to enable IPv6 PIM-SM.
Use undo pim ipv6 sm to disable IPv6 PIM-SM.
Syntax
pim ipv6 sm
undo pim ipv6 sm
Default
IPv6 PIM-SM is disabled.
Views
Interface view
Default command level
2: System level
Usage guidelines
This command can take effect only after IPv6 multicast routing is enabled on the device.
Examples
# Enable IPv6 multicast routing, and enable IPv6 PIM-SM on GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] multicast ipv6 routing-enable
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] pim ipv6 sm
Related commands
• multicast ipv6 routing-enable
• pim ipv6 dm