R3303-HP HSR6800 Routers IP Multicast Command Reference

26
[Sysname-vlan2] igmp-snooping report source-ip 10.1.1.1
Related commands
igmp-snooping enable
igmp-snooping router-aging-time
Use igmp-snooping router-aging-time to set the aging timer for the dynamic router ports in the current
VLAN.
Use undo igmp-snooping router-aging-time to restore the default.
Syntax
igmp-snooping router-aging-time interval
undo igmp-snooping router-aging-time
Default
The aging timer of the dynamic router ports is 105 seconds.
Views
VLAN view
Default command level
2: System level
Parameters
interval: Specifies an aging timer for the dynamic router ports in seconds, in the range of 1 to 1000.
Usage guidelines
This command takes effect only if IGMP snooping is enabled in the VLAN.
Examples
# Enable IGMP snooping and set the aging timer for the dynamic router ports to 100 seconds in VLAN
2.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
[Sysname-vlan2] igmp-snooping router-aging-time 100
Related commands
• igmp-snooping enable
• router-aging-time
igmp-snooping router-port-deny
Use igmp-snooping router-port-deny to disable a port from becoming a dynamic router port.
Use undo igmp-snooping router-port-deny to restore the default.