R3303-HP HSR6800 Routers IP Multicast Command Reference

379
Parameters
interval: Specifies a hello interval in seconds. The value ranges from 1 to 2147483647.
Examples
# Set the global hello interval to 40 seconds.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] timer hello 40
Related commands
pim ipv6 timer hello
timer join-prune (IPv6 PIM view)
Use timer join-prune to configure the join/prune interval globally.
Use undo timer join-prune to restore the default.
Syntax
timer join-prune interval
undo timer join-prune
Default
The join/prune interval is 60 seconds.
Views
IPv6 PIM view
Default command level
2: System level
Parameters
interval: Specifies a join/prune interval in seconds. The value ranges from 1 to 2,147,483,647.
Examples
# Set the global join/prune interval to 80 seconds.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] timer join-prune 80
Related commands
pim ipv6 timer join-prune