R3303-HP HSR6800 Routers IP Multicast Command Reference

388
Views
Any view
Default command level
1: M o n i to r l eve l
Parameters
ipv6-group-name: Specifies a peer group by its name, a string of 1 to 47 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no ipv6-group-name is specified, this command displays information about all peer groups.
Examples
# Display information about the IPv6 MBGP peer group aaa.
<Sysname> display bgp ipv6 multicast group aaa
BGP peer-group is aaa
remote AS number not specified
Type : external
Maximum allowed prefix number: 4294967295
Threshold: 75%
Configured hold timer value: 180
Keepalive timer value: 60
Minimum time between advertisement runs is 30 seconds
Peer Preferred Value: 0
No routing policy is configured
Members:
Peer AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State
20:20::20:1 200 170 141 0 2 02:13:35 Established
Table 85 Command output
Field Description
BGP peer-group Name of the IPv6 MBGP peer group.
remote AS AS number of the IPv6 MBGP peer group.
Type Type of the IPv6 MBGP peer group.
Maximum allowed prefix number
Maximum number of prefixes allowed to receive from
the IPv6 MBGP peer group.
Threshold Threshold value.