R3303-HP HSR6800 Routers IP Multicast Command Reference

389
Field Description
Configured hold timer value Hold timer value.
Keepalive timer value Keepalive interval.
Minimum time between advertisement runs Minimum interval for route advertisement.
Route refresh capability has been enabled The route-refresh capability has been enabled.
ORF advertise capability based on prefix (type 64):
The BGP peer supports the ORF capability based on IP
prefix. The capability value is 64.
Local: both
The local BGP router supports both the ORF sending
and receiving capabilities.
Negotiated: send
Negotiation result: The local BGP router can send
Router-refresh messages carrying the ORF
information, and the peer can receive Router-refresh
messages carrying the ORF information.
If receive is displayed, the local BGP router can
receive Router-refresh messages carrying the ORF
information, and the peer can send Router-refresh
messages carrying the ORF information. This field is
not displayed if neither the send nor the receive
capability is supported.)
Peer Preferred Value Preferred value of the routes from the peer.
Members Group members.
Peer IPv6 address of the peer.
AS AS number.
MsgRcvd Number of messages received.
MsgSent Number of messages sent.
OutQ Number of messages to be sent.
PrefRcv Number of prefixes received.
Up/Down
Duration of a session/duration of current state (when
no session is established).
State Peer state machine.
display bgp ipv6 multicast network
Use display bgp ipv6 multicast network to display the IPv6 MBGP routes advertised with the network
command.
Syntax
display bgp ipv6 multicast network [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: M o n i to r l eve l