R3303-HP HSR6800 Routers IP Multicast Command Reference

405
Parameters
verbose: Displays detailed routing table information, including both active and inactive routes. With this
argument absent, the command displays brief information about active IPv6 MBGP routes only.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
Active and inactive routes might coexist in the IPv6 MBGP routing table. Active routes are the optimal
routes used for RPF check.
Examples
# Display brief IPv6 MBGP routing table information.
<Sysname> display ipv6 multicast routing-table
Routing Table :
Destinations : 4 Routes : 4
Destination: 100::1/128 Protocol : Direct
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0
Table 94 Command output
Field Descri
p
tion
Destination Destination IPv6 address.
Protocol Routing protocol.
Nexthop Next hop IP address.
Preference Route preference.
Interface Outbound interface.
Cost Route cost.
# Display detailed IPv6 MBGP routing table information.
<Sysname> display ipv6 multicast routing-table verbose
Routing Table :
Destinations : 1 Routes : 1
Destination : ::1 PrefixLength : 128
NextHop : ::1 Preference : 0
RelayNextHop : :: Tag : 0H
Neighbour : :: ProcessID : 0
Interface : InLoopBack0 Protocol : Direct
State : Active NoAdv Cost : 0
Tunnel ID : 0x0 Label : NULL