R3303-HP HSR6800 Routers IP Multicast Command Reference

406
Age : 17073sec
Table 95 Command output
Field Descri
p
tion
Destination Destination IPv6 address.
PrefixLength Prefix length of the address.
Nexthop Next hop IP address.
Preference Route preference.
RelayNextHop Recursive next hop.
Tag Route tag.
Neighbour Neighbor address.
ProcessID Process ID.
Interface Outbound interface.
Protocol Routing protocol.
State Status of the route, which could be Active, Inactive, Adv, or NoAdv.
Cost Route cost.
Tunnel ID Tunnel ID.
Label Label.
Age Time elapsed since the route was generated.
display ipv6 multicast routing-table ipv6-address
Use display ipv6 multicast routing-table ipv6-address to display the multicast routing information for the
specified destination IPv6 address.
Syntax
display ipv6 multicast routing-table ipv6-address prefix-length [ longer-match ] [ verbose ] [ | { begin |
exclude | include } regular-expression ]
Views
Any view
Default command level
1: M o n i to r l eve l
Parameters
ipv6-address: Specifies a destination IPv6 address.
prefix-length: Specifies a prefix length in the range of 0 to 128.
longer-match: Displays routes matching the specified prefix.
verbose: Displays both detailed active and inactive routing information permitted by the ACL. Without
this keyword, only the brief information about active routes permitted by the ACL is displayed.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.