R3303-HP HSR6800 Routers IP Multicast Command Reference

31
Syntax
igmp-snooping version version-number
undo igmp-snooping version
Default
The IGMP snooping version is IGMPv2 snooping.
Views
VLAN view
Default command level
2: System level
Parameters
version-number: Specifies an IGMP snooping version, 2 or 3.
Usage guidelines
This command can take effect only if IGMP snooping is enabled in the VLAN.
Examples
# Enable IGMP snooping and specify the IGMP snooping version to IGMPv3 snooping in VLAN 2.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
[Sysname-vlan2] igmp-snooping version 3
Related commands
igmp-snooping enable
last-member-query-interval (IGMP-snooping view)
Use last-member-query-interval to configure the IGMP last-member query interval globally.
Use undo last-member-query-interval to restore the default.
Syntax
last-member-query-interval interval
undo last-member-query-interval
Default
The default setting is 1 second.
Views
IGMP-snooping view
Default command level
2: System level
Parameters
interval: Sets the IGMP last-member query interval in seconds, in the range of 1 to 5.