R3303-HP HSR6800 Routers IP Multicast Command Reference

32
Usage guidelines
The IGMP last-member query interval determines the interval for sending IGMP group-specific queries
and the maximum response delay for IGMP group-specific queries.
For a router that supports both IGMP snooping and IGMP and is installed with the SAP module, this
command takes effects in IGMP snooping-enabled VLANs but not in VLANs with IGMP-enabled VLAN
interfaces.
Examples
# Set the IGMP last-member query interval to 3 seconds globally.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] last-member-query-interval 3
Related commands
igmp-snooping last-member-query-interval
max-response-time (IGMP-snooping view)
Use max-response-time to set the global maximum response delay for IGMP general queries.
Use undo max-response-time to restore the default.
Syntax
max-response-time interval
undo max-response-time
Default
The default setting is 10 seconds.
Views
IGMP-snooping view
Default command level
2: System level
Parameters
interval: Sets the maximum response delay in seconds for IGMP general queries, in the range of 1 to 25.
Usage guidelines
For a router that supports both IGMP snooping and IGMP and is installed with the SAP module, this
command takes effects in IGMP snooping-enabled VLANs but not in VLANs with IGMP-enabled VLAN
interfaces.
Examples
# Set the global maximum response delay for IGMP general queries to 5 seconds.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] max-response-time 5
Related commands
• igmp-snooping max-response-time