R3303-HP HSR6800 Routers IP Multicast Command Reference

428
Default command level
1: M o n i to r l eve l
Parameters
ipv6-address: Specifies an IPv6 MBGP peer by its IPv6 address.
all: Specifies all IPv6 MBGP connections.
external: Specifies IPv6 multicast EBGP connections.
group ipv6-group-name: Specifies an IPv6 multicast peer group by its name, a string of 1 to 47
characters.
internal: Specifies IPv6 multicast IBGP connections.
export: Specifies the outbound direction.
import: Specifies the inbound direction.
Usage guidelines
To perform IPv6 MBGP soft-reset, all routers in the network should support route-refresh. If a peer does not
support route refresh, you must use the peer keep-all-routes command on the local router to save all route
updates from the peers before a soft reset.
Examples
# Soft-reset the IPv6 MBGP connections in the inbound direction.
<Sysname> refresh bgp ipv6 multicast all import
reset bgp ipv6 multicast
Use reset bgp ipv6 multicast to reset specified IPv6 MBGP connections to reconnect to the peers.
Syntax
reset bgp ipv6 multicast { as-number | ipv6-address [ flap-info ] | all | group ipv6-group-name |
external | internal }
Views
User view
Default command level
2: System level
Parameters
as-number: Specifies an AS by its number.
ipv6-address: Specifies a peer by its IPv6 address.
flap-info: Specifies routing flap information.
all: Specifies all IPv6 MBGP connections.
group ipv6-group-name: Specifies an IPv6 MBGP peer group by its name.
external: Specifies all EBGP connections.
internal: Specifies all IBGP connections.