R3303-HP HSR6800 Routers IP Multicast Command Reference

437
Multicast VLAN configuration commands
The commands in this chapter are available only when the SAP module is operating in bridge mode.
display multicast-vlan
Use display multicast-vlan to display information about the specified multicast VLAN.
Syntax
display multicast-vlan [ vlan-id ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
vlan-id: Specifies a multicast VLAN ID in the range of 1 to 4094. If this argument is not specified, this
command displays information about all multicast VLANs.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about all multicast VLANs.
<Sysname> display multicast-vlan
Total 4 multicast-vlan(s)
Multicast vlan 100
subvlan list:
vlan 2 4-6
port list:
no port
Multicast vlan 200
subvlan list:
no subvlan
port list:
GE2/0/1 GE2/0/2
Multicast vlan 300