R3303-HP HSR6800 Routers IP Multicast Command Reference

438
subvlan list:
vlan 3
port list:
GE2/0/3 GE2/0/4
Multicast vlan 400
subvlan list:
no subvlan
port list:
no port
Table 100 Command output
Field Descri
p
tion
Total 4 multicast-vlan(s) Total number of multicast VLANs.
subvlan list List of sub-VLANs of the multicast VLAN.
port list Port list of the multicast VLAN.
multicast-vlan
Use multicast-vlan to configure the specified VLAN as a multicast VLAN and enter multicast VLAN view.
Use undo multicast-vlan to remove the specified VLAN as a multicast VLAN.
Syntax
multicast-vlan vlan-id
undo multicast-vlan { all | vlan-id }
Default
The VLAN to be configured is not a multicast VLAN.
Views
System view
Default command level
2: System level
Parameters
vlan-id: Specifies a VLAN ID in the range of 1 to 4094.
all: Specifies all multicast VLANs.
Usage guidelines
The specified VLAN to be configured as a multicast VLAN must exist.
The multicast VLAN feature cannot be enabled on a device with IP multicast routing enabled.
For a sub-VLAN-based multicast VLAN, you must enable IGMP snooping in the multicast VLAN. For a
port-based multicast VLAN, you must enable IGMP snooping in both the multicast VLAN and all the
VLANs that contain the multicast data receivers.