R3303-HP HSR6800 Routers IP Multicast Command Reference

439
Examples
# Enable IGMP snooping in VLAN 100. Configure it as a multicast VLAN and enter multicast VLAN view.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] quit
[Sysname] vlan 100
[Sysname-vlan100] igmp-snooping enable
[Sysname-vlan100] quit
[Sysname] multicast-vlan 100
[Sysname-mvlan-100]
Related commands
• igmp-snooping enable
• multicast routing-enable
multicast-vlan entry-limit
Use multicast-vlan entry-limit to configure the maximum number of entries in an IGMP snooping
forwarding table for multicast VLANs.
Use undo multicast-vlan entry-limit to restore the default.
Syntax
multicast-vlan entry-limit limit
undo multicast-vlan entry-limit
Default
The maximum number of entries in the IGMP snooping forwarding table for multicast VLANs is 1000.
Views
System view
Default command level
2: System level
Parameters
limit: Specifies the maximum number of entries in the IGMP snooping forwarding table for multicast
VLANs, in the range of 1 to 1000.
Examples
# Configure the IGMP snooping forwarding table of multicast VLANs to contain 512 entries at most.
<Sysname> system-view
[Sysname] multicast-vlan entry-limit 512
Related commands
entry-limit
port (multicast VLAN view)
Use port to assign the specified ports to the current multicast VLAN.