R3303-HP HSR6800 Routers IP Multicast Command Reference

34
Default
IGMP report suppression is enabled.
Views
IGMP-snooping view
Default command level
2: System level
Usage guidelines
For a router that supports both IGMP snooping and IGMP and is installed with the SAP module, this
command takes effect on IGMP snooping-enabled VLANs and VLANs with IGMP-enabled VLAN
interfaces.
Examples
# Disable IGMP report suppression.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] undo report-aggregation
reset igmp-snooping group
Use reset igmp-snooping group to remove the dynamic group entries for the specified IGMP snooping
groups.
Syntax
reset igmp-snooping group { group-address | all } [ vlan vlan-id ]
Views
User view
Default command level
2: System level
Parameters
group-address: Specifies an IGMP snooping group in the range of 224.0.1.0 to 239.255.255.255.
all: Specifies all IGMP snooping groups.
vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094.
Usage guidelines
For a router that supports both IGMP snooping and IGMP and is installed with the SAP module, this
command takes effect only on IGMP snooping-enabled VLANs but not in VLANs with IGMP-enabled
VLAN interfaces.
This command cannot remove the static group entries for IGMP snooping groups.
Examples
# Remove the dynamic group entries for all IGMP snooping groups.
<Sysname> reset igmp-snooping group all