R3303-HP HSR6800 Routers IP Multicast Command Reference

35
reset igmp-snooping statistics
Use reset igmp-snooping statistics to clear statistics for the IGMP messages learned through IGMP
snooping.
Syntax
reset igmp-snooping statistics
Views
User view
Default command level
2: System level
Examples
# Clear the statistics for all IGMP messages learned through IGMP snooping.
<Sysname> reset igmp-snooping statistics
router-aging-time (IGMP-snooping view)
Use router-aging-time to set the aging timer for the dynamic router ports globally.
Use undo router-aging-time to restore the default.
Syntax
router-aging-time interval
undo router-aging-time
Default
The aging timer of dynamic router ports is 105 seconds.
Views
IGMP-snooping view
Default command level
2: System level
Parameters
interval: Specifies an aging timer in seconds for the dynamic router ports, in the range of 1 to 1000.
Usage guidelines
For a router that supports both IGMP snooping and IGMP and is installed with the SAP module, this
command takes effect on IGMP snooping-enabled VLANs but not in VLANs with IGMP-enabled VLAN
interfaces.
Examples
# Set the aging timer for the dynamic router ports to 100 seconds globally.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] router-aging-time 100