R3303-HP HSR6800 Routers IP Multicast Command Reference

36
Related commands
igmp-snooping router-aging-time
source-deny (IGMP-snooping view)
Use source-deny to enable multicast source port filtering so that all multicast data packets are blocked.
Use undo source-deny to disable multicast source port filtering.
Syntax
source-deny port interface-list
undo source-deny port interface-list
Default
Multicast source port filtering is not enabled.
Views
IGMP-snooping view
Default command level
2: System level
Parameters
interface-list: Specifies a space-separated list of interface items. Each item specifies an interface or an
interface list in the format of start-interface-type interface-number to end-interface-type interface-number.
The interface-type interface-number argument specifies an interface by its type and number.
Usage guidelines
For a router that supports both IGMP snooping and IGMP and is installed with the SAP module, this
command takes effect on IGMP snooping-enabled VLANs and VLANs with IGMP-enabled VLAN
interfaces.
Examples
# Enable multicast source port filtering on interfaces GigabitEthernet 2/0/1 through GigabitEthernet
2/0/4.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] source-deny port gigabitethernet 2/0/1 to gigabitethernet 2/0/4