R3303-HP HSR6800 Routers IP Multicast Command Reference

37
Multicast routing and forwarding configuration
commands
delete ip rpf-route-static
Use delete ip rpf-route-static to delete all static multicast routes.
Syntax
delete ip rpf-route-static [ vpn-instance vpn-instance-name ]
Views
System view
Default command level
2: System level
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters. If this option is not specified, the command deletes all static multicast routes on the public
network.
Examples
# Delete all static multicast routes on the public network.
<Sysname> system-view
[Sysname] delete ip rpf-route-static
This will erase all multicast static routes and their configurations, you must reconfigure
all static routes
Are you sure?[Y/N]:
Related commands
ip rpf-route-static
display mac-address multicast
Use display mac-address multicast to display the static multicast MAC address entries.
Syntax
display mac-address [ mac-address [ vlan vlan-id ] | [ multicast ] [ vlan vlan-id ] [ count ] ] [ | { begin |
exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level