R3303-HP HSR6800 Routers IP Multicast Command Reference

45
List of 1 DF interfaces:
1: GigabitEthernet2/1/2
Table 9 Command output
Field Descri
p
tion
Multicast DF information of
VPN-Instance: public net
DF information of the multicast forwarding table for the public network.
Total 1 RP Total number of RPs.
Total 1 RP matched Total number of matched RPs.
00001 Sequence number of the RP.
MID ID of the RP. Each RP has a unique MID.
Flags
Current state of the RP. Different bits indicate different states of an RP. For major
values of this field, see Table 7 and Table 8.
Uptime Length of time for which the RP has been up, in the format hh:mm:ss .
RPF interface RPF interface to the RP.
List of 1 DF interfaces DF interface list.
display multicast routing-table
Use display multicast routing-table to display multicast routing table information.
Syntax
display multicast [ all-instance | vpn-instance vpn-instance-name ] routing-table [ source-address [ mask
{ mask | mask-length } ] | group-address [ mask { mask | mask-length } ] | incoming-interface
{ interface-type interface-number | register } | outgoing-interface { exclude | include | match }
{ interface-type interface-number | register } ] * [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
all-instance: Specifies all VPN instances.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters.
source-address: Specifies a multicast source address.
group-address: Specifies a multicast group address in the range of 224.0.0.0 to 239.255.255.255.
mask: Specifies the mask of the multicast group address or multicast source address, 255.255.255.255
by default.
mask-length: Specifies the address mask length. The default value is 32. For a multicast group address,
the value range for this argument is 4 to 32. For a multicast source address, the value range for this
argument is 0 to 32.