R3303-HP HSR6800 Routers IP Multicast Command Reference

48
Examples
# Display all the static multicast routes on the public network.
<Sysname> display multicast routing-table static
Multicast Routing Table of VPN-Instance: public net
Routes : 1
Mroute 10.10.0.0/16
Interface = GigabitEthernet2/1/1 RPF Neighbor = 2.2.2.2
Matched routing protocol = <none>, Route-policy = <none>
Preference = 1, Order = 1
Running Configuration = ip rpf-route-static 10.10.0.0 16 2.2.2.2 order 1
Table 11 Command output
Field Descri
p
tion
Multicast Routing Table of
VPN-Instance: public net
Multicast routing table for the public network.
Mroute Multicast route source address and its mask length.
Interface Outgoing interface to the multicast source.
RPF Neighbor
IP address of the RPF neighbor through which the multicast source is
reachable.
Route-policy
Routing policy. The multicast source address of the route should match
the routing policy.
Preference Route preference.
Order Sequence number of the route.
Running Configuration Command line that configures the static multicast route.
display multicast rpf-info
Use display multicast rpf-info to display the RPF information of a multicast source.
Syntax
display multicast [ all-instance | vpn-instance vpn-instance-name ] rpf-info source-address
[ group-address ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
all-instance: Specifies all VPN instances.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters.
source-address: Specifies a multicast source address.