R3303-HP HSR6800 Routers IP Multicast Command Reference

54
Field Descri
p
tion
-1 5.5.5.8
(S, G) outgoing interface address of each hop, starting from the
last-hop router.
Incoming interface address IP address of the interface on which the (S, G) packets arrive.
Previous-hop router address
IP address of the previous router that forwards the packets to the current
route.
Input packet count on incoming
interface
Total number of multicast packets received on the incoming interface.
Output packet count on outgoing
interface
Total number of multicast packets transmitted on the outgoing interface.
Total number of packets for this
source-group pair
Total number of packets from the specified source forwarded by this
router to the specified group.
Protocol Multicast routing protocol in use.
Forwarding TTL
Minimum TTL that a packet must have before it can be forwarded over
the outgoing interface.
multicast boundary
Use multicast boundary to configure a multicast forwarding boundary.
Use undo multicast boundary to remove a multicast forwarding boundary.
Syntax
multicast boundary group-address { mask | mask-length }
undo multicast boundary { group-address { mask | mask-length } | all }
Default
No multicast forwarding boundary is configured.
Views
Interface view
Default command level
2: System level
Parameters
group-address: Specifies a multicast group address in the range of 224.0.0.0 to 239.255.255.255.
mask: Specifies the mask of the multicast group address.
mask-length: Specifies the mask length of the multicast group address, in the range of 4 to 32.
all: Specifies all forwarding boundaries configured on the interface.
Usage guidelines
A multicast forwarding boundary sets the boundary condition for the multicast groups in the specified
address range. If the destination address of a multicast packet matches the set boundary condition, the
packet is not forwarded.