R3303-HP HSR6800 Routers IP Multicast Command Reference

67
Examples
# Display information about the hosts tracked by IGMP that join in IGMP group 224.1.1.1 on the Layer 2
ports in VLAN 2.
<Sysname> display igmp host port-info vlan 2 group 224.1.1.1
VLAN(ID) : 2
(0.0.0.0, 224.1.1.1)
Port : GigabitEthernet2/1/1
Host Uptime Expires
1.1.1.1 00:02:20 00:00:40
2.2.2.2 00:02:21 00:00:39
Port : GigabitEthernet2/1/2
Host Uptime Expires
3.3.3.3 00:02:20 00:00:40
Table 17 Command output
Field Descri
p
tion
VLAN(ID) VLAN ID.
(0.0.0.0, 224.1.1.1) (S, G) entry, where "0.0.0.0" means all multicast sources.
Port Member port.
Host Host IP address.
Uptime Host running duration.
Expires Host expiration time, where "timeout" means that the host has expired.
display igmp interface
Use display igmp interface to display IGMP configuration and operation information of the specified
interface or all IGMP-enabled interfaces.
Syntax
display igmp [ all-instance | vpn-instance vpn-instance-name ] interface [ interface-type
interface-number ] [ verbose ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
all-instance: Specifies all MPLS L3VPNs.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters.
interface-type interface-number: Specifies an interface by its type and number. If no interface is specified,
this command displays the related information of all IGMP-enabled interfaces.
verbose: Displays the detailed IGMP configuration and operation information.