R3303-HP HSR6800 Routers IP Multicast Command Reference

70
Syntax
display igmp [ all-instance | vpn-instance vpn-instance-name ] proxying group [ group-address ]
[ verbose ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
all-instance: Specifies all MPLS L3VPNs.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters.
group-address: Specifies a multicast group address in the range of 224.0.1.0 to 239.255.255.255. With
no multicast group address included, this command displays the information of all the IGMP proxying
groups.
verbose: Displays the detailed IGMP proxying group information.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If neither all-instance nor vpn-instance is specified, this command displays the information on the public
network.
Examples
# Display the IGMP proxying group information on the public network.
<Sysname> display igmp proxying group
Proxying group record(s) information of VPN-Instance: public net
Total 1 IGMP-Proxying group record(s)
Group Address Member state Expires
225.1.1.1 Delay 00:01:15
# Display the detailed information of IGMP proxying group 225.1.1.1 on the public network.
<Sysname> display igmp proxying group 225.1.1.1 verbose
Proxying group record(s) information of VPN-Instance: public net
Total 1 IGMP-Proxying group record(s)
Group: 225.1.1.1
Group mode: include
Member state: Delay
Expires: 00:00:02
Source list (total 1 source(s))
Source: 1.1.1.1