R3303-HP HSR6800 Routers IP Multicast Command Reference

71
Table 19 Command output
Field Descri
p
tion
Proxying group record(s) information of
VPN-Instance: public net
IGMP proxying group information on the public network.
Total 1 IGMP-Proxying group record(s) One IGMP proxying group is recorded.
Group Address/Group Multicast group address.
Member state
Host member states:
• Delay.
• Idle.
Expires
Remaining time of the multicast group, where "off" means
that the multicast group never times out.
Group mode
Multicast source filtering modes:
• Include.
• Exclude.
(This field is displayed only when the IGMP version is 3.)
Source list
A list of sources (only including the sources that the hosts
want to receive information from).
display igmp routing-table
Use display igmp routing-table to display the IGMP routing table information.
Syntax
display igmp [ all-instance | vpn-instance vpn-instance-name ] routing-table [ source-address [ mask
{ mask | mask-length } ] | group-address [ mask { mask | mask-length } ] | flags { act | suc } ] * [ |
{ begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
all-instance: Specifies all MPLS L3VPNs.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters.
source-address: Specifies a multicast source address.
group-address: Specifies a multicast group address in the range of 224.0.1.0 to 239.255.255.255.
mask: Specifies the mask of the multicast group address or multicast source address, 255.255.255.255
by default.
mask-length: Specifies the address mask length. The default value is 128. For a multicast source address,
the value range for this argument is 0 to 32. For a multicast group address, the value range for this
argument is 4 to 32.